==== Enabling MIDI ====

  - Start LoopMidi (should run on startup)
  - [[xbox|Gamepad to MIDI]] should run on startup 
  - Start MIDI Ox (should run on startup but may need to be restarted)
  - Make sure Midi Ox //VJ// or //xbox// preset is active
  - Check seeing MIDI signal

In MIDI Ox, click green MIDI plug icon to see port activity.  Shows input and output ports, press a key, check which are active.  Is it always "controller in" "MIDIBridge Out"?

==== In MD3 ====

  - options > MIDI
  - rescan
  - choose MidiBridge
  - seeing MIDI messages?
  - make sure Device # matches 1st digit in MIDI messages
  - make sure 1st # column also matches - should change with Device # setting 
{{ :midi.png?400 |}}  
 
==== In MMV ====
  - make sure Input sources window is visible
  - add a new source and give meaningful name (or select source)
  - make sure the source is pointing to the MIDI Out port (MIDIBridge?)
 {{ :midi_mmv1.png?direct&400 |}}
3. Whichever parameter is using MIDI it must connect to the named source (LaunchPad Mini in example)
  

==== In Resolume ====
  - Top menu: avenue > Preferences > MIDI
  - refresh
  - open monitor
  - make sure correct device is selected and MIDI Input is active
  - test MIDI messages
  - close preferences
  - top menu: shortcuts > edit MIDI or  Ctrl+Shift+M to enable MIDI overlay
  - select button/knob/parameter
  - press MIDI key
  - if turning knob, change the mode to relative

{{::resolume_midi_1.png?400 |}}

{{::resolume_midi_2.png?400 |}}

{{::resolume_midi_3.png?400 |}}




==== Windows Desktops ====
start MIDIKey2Key
  - Make sure #1 is checked - it needs to get values from 1st and 2nd pair in #5
  - this should already be checked
  - give it a meaningful name
  - get the value from the DATA column after pressing key e.g. 907100 (hmmm, does it need the final 2 digits?)
  - insert them
  - save
  - don't forget to add the action e.g. Control+LWin+Left, in the box above #3
{{::midikey2key_2.png?direct&400 |}}

==== TouchOSC - Tablet ====

  - Start TOSC Bridge on **PC**
  - Start TOSC on **tablet**
  - Go to edit screen
  - Click connections
  - Go to Bridge section
  - Browse
  - Select connection (SteveD?)
  - Check in Protokol - don't forget to enable MIDI
  - **In MIDI Ox**
    {{ :midiox.png?nolink&200 |}}
  - Check MIDI being received
  - **In MD3** 
  - Options tab
  - MIDI section
  - Enable MIDI messages
  - Make sure Device # matches 1st digit in MIDI messages
  - Make sure 1st # column also matches - should change with Device # setting
    {{ :midi.png?nolink&200 |}}